招生信息

机械工程（博士）、机械制造及其自动化（学硕）、机械（专硕）专业研究生，以及机械工程相关领域博士后。

个人简介

赵雪峰，教授，硕导、博导，2010年于北京航空航天大学获得机械设计及理论专业博士学位。2013-2016年在ok138太阳集团中国官方网站从事博士后研究工作。入选贵州省高层次创新型人才（"千层次"）。

教学与课程

主讲的本科生课程：《机器人技术》、《互换性与技术测量》

主讲的研究生课程：《机器人技术》

科研项目

[1]国家自然科学基金，52065012，磁弹磨粒双磁盘磁力刀具钝化机理研究，2021.1-2024.12，主持

[2]国家自然科学基金项目，51665007，刀具非对称刃口钝化机制与对切削性能影响的研究，2017.1-2020.12，主持

[3]贵州省科技计划项目，黔科合基础ZD[2026]041，多相剪切阻塞流体/Kevlar纤维复合材料防弹机理及智能优化研究，2026.1-2029.12，主持

[4]贵州省科技计划项目，黔科合基础-ZK[2022]一般153，基于双磁盘磁弹磨粒的刀具非对称刃口钝化机理研究，2022.4-2025.3，主持

[5]贵州省高层次创新型人才（"千层次"）项目，贵大"千"层次[2017]05，2018.1-2022.12，主持

论文

[1]Yin Y, Xi C, Tao Z, Xuefeng Z*, et al. Shear jamming effect in non-Newtonian fluids for tool edge preparation: Mechanism, modeling, and experimental validation[J]. Tribology International, 2026, 219:111841-111841.（SCI中科院一区，IF=7.6，Top）

[2]Yin Y, Xuefeng Z*, Xiaolong Y, et al. Optimization of tool edge preparation using magnetoelastic abrasives and development of a wear prediction model based on logistic chaotic mapping and sparrow algorithm[J]. Mechanical Systems and Signal Processing, 2025, 235:112909-112909.（SCI中科院一区，IF=10.2，Top）

[3]Yin Y, Xuefeng Z*, Piao L, et al. Simulation and experimental study of tool passivation based on magnetic elastic abrasive particles[J]. Tribology International, 2025, 201: 110234.（SCI中科院一区，IF=7.6，Top）

[4]Yin Y, Xuefeng Z*, Ke Y, et al. Mechanism and experiment of magnetoelastic abrasive dual-disk passivation based on EDEM secondary development[J]. Journal of Manufacturing Processes, 2025, 151:858-884.（SCI中科院一区，IF=7.8，Top）

[5]Wang S, Yuan Y, Zhou T, Xuefeng Z*, et al.Edge passivation of triangular turning inserts using silicone rubber magnetoelastic abrasives: Simulation and experiment[J]. Results in Engineering, 2026, 29:109118-109118.（中科院二区，IF=9.4，Top）

[6]Shuiyu W, Yin Y, Bin Z, Xuefeng Z*, et al. Simulation and Experiment of Tool Passivation Based on Non-Newtonian Fluid Shear Jamming Effect[J]. Materials Today Communications, 2025: 113706.（SCI中科院三区，IF=4.9）

[7]Zhang B, Zheng W, Yuan Y, Xuefeng Z*, et al. Study on the passivation process and performance of carbide milling cutter based on shear jamming effect[J].Materials Today Communications, 2025, 49:114229-114229.（SCI中科院三区，IF=4.9）

[8]Zhang B, Zheng W, Yuan Y, Xuefeng Z*, et al.Numerical study of rotating helical groove for drag reduction[J].Transactions of the Canadian Society for Mechanical Engineering, 2025, 50:1-17.（SCI中科院四区，IF=1.3）

[9]Yang Y, Zhao X*, Zhao L. Research on asymmetrical edge tool wear prediction in milling TC4 titanium alloy using deep learning[J]. Measurement, 2022, 203: 111814.（SCI中科院二区，IF=5.6，Top）

[10]Liu P, Zhao X*, Yuan Y, et al. Modelling and simulation of tool passivation by magnetic elastic abrasive particles[J]. CIRP Journal of Manufacturing Science and Technology, 2024, 49: 62-79.（SCI中科院二区，IF=5.4）

[11]Yuan Y, Zhao X*, You K, et al. Research on an epoxy resin magnetoelastic abrasive: Application in tool edge preparation[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2023: 09544054231205100.（SCI中科院三区，IF=2.6）

[12]Zhao X F, Yuan Y, You K, et al. Characteristics of magnetic elastic abrasive particles and their effect on tool passivation[J]. The International Journal of Advanced Manufacturing Technology, 2024, 132(3): 1193-1215.（SCI中科院三区，IF=3.1）

[13]Wu H, Zhao X*, Yuan Y, et al. Material removal model of magnetoelastic abrasive particles in dual-disk magnetic cutting edge preparation[J]. The International Journal of Advanced Manufacturing Technology, 2024, 132(9): 4329-4344.（SCI中科院三区，IF=3.1）

[14]Zhao Xuefeng, Li Hui, He Lin, Tao Meng. Modeling and detection of the prepared tool edge radius[J].Science Progress,2020,103(3).（SCI中科院四区，IF=2.9）

[15]Zhao Xuefeng, Qin Hao, Feng Zhiguo. Influence of tool edge form factor and cutting parameters on milling performance[J]. Advances in Mechanical Engineering, 2021,13(4).（SCI中科院四区，IF=2）

[16]Zhao X F, Yang Y, He L, et al. Experiment and Modeling of Milling Force Based on Tool Edge Preparation[J]. Experimental Techniques, 2021: 1-13.（SCI中科院四区，IF=1.9）

[17]Yuan Yin, Zhao Xuefeng*, You Ke. Tool Edge Preparation Based on Gas-Solid Two-Phase Abrasive Flow[J]. Journal of The Institution of Engineers (India): Series C,2022,104(1).(EI源刊)

[18]赵雪峰, 秦浩, 杨勇, 等. 基于硅胶型磁弹磨粒的双磁盘磁力钝化研究[J]. 西北工业大学学报, 2021, 39(6): 1304-1311.(EI源刊)

[19]赵雪峰, 游科, 袁银, 等. 磁弹磨粒双磁盘磁力钝化仿真与实验研究[J]. 华南理工大学学报, 2023, 51(5): 130-140.(EI源刊)

[20]赵雪峰, 杨勇, 秦浩, 等. 刀具非对称刃口瞬时铣削力建模与实验研究[J]. 华南理工大学学报, 2021, 49(12):69-78.(EI源刊)

专利

[1] 赵雪峰,秦浩,杨勇,李辉,游科,殷小龙,袁银.一种双磁盘磁力钝化装置及其钝化方法,2020,11482168.2[P].2021-03-16.(公开发明)

[2] 赵雪峰,杨勇,秦浩,李辉,殷小龙,游科,袁银.一种气固两相流磨粒刀具钝化设备,2020,11507138.2[P].2021-03-16.(公开发明)

[3] 赵雪峰,秦浩,杨勇,游科,殷小龙,袁银.一种基于硅胶体的新型磁弹复合磨粒,2021,10597913.6[P].2021-08-20.(公开发明)

[4] 赵雪峰,秦浩,杨勇,李辉,游科,殷小龙,袁银.一种双磁盘磁力钝化装置,2020,23023870.0[P].2021-08-31.(实用新型)

社会兼职

任《Tribology International》、《Mechanical Systems and Signal Processing》、《Journal of Manufacturing Processes》、《Materials Today Communications》、《工具技术》等期刊审稿人；国家自然科学基金函评专家；教育部学位中心论文评审专家。